XK (X150) V8-4.2L SC (2007)Центральный модуль управления сервисное обслуживание и ремонт

Discussion in 'XK' started by Gileev Anton, Jul 19, 2018.

Tags:
  1. Gileev Anton

    Gileev Anton Administrator Staff Member Член Клуба JCR Почётный член Клуба

    Messages:
    11,170
    Likes Received:
    6,997
    Trophy Points:
    113
    Город:
    Ноябрьск
    Автомобиль:
    X-Type
    Комплектация:
    sport
    Год a/м:
    2008
    Гос. номер:
    м324ох123
    Двигатель:
    2.0
    Центральный модуль управления: сервисное обслуживание и ремонт
    Central Control Module: Service and Repair

    Information and Entertainment Module (86.53.48)

    Removal
    1. Disconnect the battery ground cable.
    2. Remove the instrument panel center reinforcement trim panel.
    3. Release the navigation system module bracket.
    4. Remove the information and entertainment module.

    -Remove the 4 Torx bolts.
    -Disconnect the 2 electrical connectors.
    -Remove the 4 Torx screws.
    -Release the assembly
    -Release from the 5 clips.
    1.png
    1. Install the information and entertainment module.

    -Tighten the Torx bolts to 6 Nm (4 lb.ft).
    -Connect the electrical connectors.

    2. Install the navigation system module bracket.
    -Tighten the Torx screws.

    3. Install the instrument panel center reinforcement trim panel.
    -Align the pegs and secure with the clips.
    4. Connect the battery ground cable.
    5. Connect WDS to the vehicle and configure a new module
     
    Gileev Anton, Jul 19, 2018
    #1

Share This Page